Clean Joints Naturally With These Tips And Tricks

The joints between the tiles are a white composition that deteriorates over time due to moisture, dust and other substances that accumulate on the surface.
Clean joints naturally with these tips and tricks

 Joints have small pores that darken due to overgrowth of mold, bacteria and other microorganisms that easily grow in a humid environment.

These areas start to look dirty and also increase your risk of an allergic reaction.

These areas need to be cleaned regularly using special products to remove these ugly stains.

The good news is that there are natural remedies that do not contain any harsh chemicals that are harmful to the environment or your health.

This time we want to share a few of the best tricks for cleaning joints without having to spend a lot of money.

Ready?

Clean your joints with baking soda

Baking soda is a versatile ingredient that can also be used for house cleaning of e.g.  fuger.

Baking soda is one of the best products for organic cleaning of the rooms in your home.

The properties of baking soda stubbornly remove dirt from tiles and neutralize harmful bacteria.

Ingredients

  • 1/2 cup baking soda
  • hot water
  • 1 brush

Guidance

  • Combine the baking soda with enough hot water to make a mass and use it to clean joints with a brush.
  • Let it work for 30 minutes and then wipe with a soft cloth.

Hydrogen peroxide

The classic disinfectant for wounds is excellent for removing mold, dust and other dirt that accumulates in the spaces between the tiles.

Ingredients

  • ½ cup of hydrogen peroxide
  • 1 brush

Guidance

  • Spray hydrogen peroxide on the surfaces you want to clean and scrub with a brush to remove dirt.
  • Let it work for 20 minutes, then rinse with soap and water.

White vinegar

vinegar

White vinegar has so many uses that it has been the number one natural cleanser for years.

Its use in the home has once again begun to attract attention as an organic alternative to cleaning your home.

Its antifungal, antibacterial and bleaching properties remove mold from tiles and joints.

It will also neutralize the odor of the mold and leave a fresh clean scent.

Ingredients

  • ½ cup white vinegar
  • ¼ cup of hot water
  • 1 spray bottle

Guidance

  • Combine the white vinegar and the hot water and pour it into a spray bottle.
  • Spray the joints and let it work for 10 minutes.
  • Scrub with a brush or sponge.
  • If the black spots are really hard to remove, apply the vinegar cleanly without dilution.
  • Rinse with warm water and dry with a cloth.

Baking soda and liquid soap

The combination of baking soda, liquid soap and white vinegar gives us an effective solution to combat severely stubborn stains on joints and tile surfaces.

This solution completely removes mold and creates a protective barrier against the fungi that grow in humid environments.

Ingredients

  • ½ cup Soda
  • 1 teaspoon environmentally friendly liquid soap
  • ¼ cup of hydrogen peroxide
  • 1 brush

Guidance

  • Mix baking powder, liquid soap and hydrogen peroxide in a bowl.
  • Use a spray bottle to apply it to joints and tiled surfaces and let it work for 10 minutes.
  • scrub thoroughly with a brush before rinsing.

Water with bleach

clean-tiles

Chlorine or bleach is one of the best products for cleaning, bleaching and disinfecting.

Although it is more chemically aggressive than the other alternatives listed here, it is one of the best solutions to remove mold and stains.

Ingredients

  • ½ liters of hot water
  • 3 tablespoons bleach
  • 1 brush

Guidance

  • Dilute the bleach in the warm water and apply it to the tiles with a sponge or spray bottle.
  • Let it work for 5 minutes, then scrub with a brush before rinsing.

Apple cider vinegar

Although apple cider vinegar is widely used for culinary and medicinal purposes, it is also an excellent natural cleanser.

Ingredients

  • ½ cup apple cider vinegar
  • ½ cup of water
  • 1 brush

Guidance

  • Dilute the vinegar in the water and apply it on joints with a brush.
  • Let it work for 5 minutes, then wipe with a cloth dipped in warm water.

Are you ready to get started? Keep these simple tricks in mind the next time you want to clean grout and tile surfaces.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button